Stability studies on methyl and ethyl fatty acid esters of sunflowerseed oil

Fatty acid esters, high in linoleic acid, were prepared and stored for long-term engine tests. Storage tests with these esters were undertaken to obtain more information on optimal storage requirements and general stability characteristics. Samples were kept at three temperature levels (20 C, 30 C and fluctuating around 50 C) for a 90-day period and were removed at regular intervals for chemical and physical analysis. The influence of air, temperature, light, TBHQ and contact with mild steel was evaluated by comparing the free fatty acid, peroxide, anisidine, ultraviolet absorption, viscosity and induction periods. A statistical model was used to evaluate the data and to reduce the large number of data points to comparable curves. Storage of esters in contact with air, especially at a temperature above 30 C, resulted in significant increases in peroxide, ultraviolet absorption, free fatty acid, viscosity and anisidine values. Exclusion of air retarded oxidation at all temperature levels. A direct relationship between viscosity increases and oxidation parameters was evident. Exposure to light caused a small increase in the oxidation parameters of esters stored at the highest temperature level. Addition of TBHQ prevented oxidation of samples stored under moderate conditions. Under unfavorable storage conditions the anti-oxidant was no longer effective. Mild steel had very little effect on the oxidation parameters. Only the anisidine values of samples stored at the highest temperature level were slightly increased. Methyl esters performed slightly better than ethyl esters during the storage test. The following practical guidelines for storage of fatty acid ester fuels are: (i) airtight containers should be used; (ii) the storage temperature should be <30 C; (iii) mild steel (rust free) containers may be used, and (iv) TBHQ has a beneficial effect on oxidation stability.     

环境友好水基润滑添加剂的研究

在脂肪酸分子中引入硼和氮，合成了一种环境友好水基润滑添加剂BNR，并利用红外光谱对其主要官能团进行了表征。通过四球试验机考察了BNR添加剂在水中的抗磨性能与极压性能，用X射线光电子能谱仪对磨痕表面元素进行了分析，探讨了该类添加剂的极压抗磨作用机理。结果表明：硼氮化水基润滑添加剂BNR在水中具有优良的抗磨和减摩性能；其润滑作用机理是由于长链脂肪酸分子的载体作用、硼的缺电子性、氮的高反应活性以及三者的协同作用与摩擦金属表面形成了一层高强度的吸附膜和／或摩擦化学反应膜。     

连轧机用人字轮齿轴断裂失效分析

用宏观断口分析、化学检验、力学性能测定、低倍检查、金相组织及夹杂物评定鉴别、受力分析及强度寿命定量估算的方法，对人字轮被动齿轴端断裂失效原因进行分析，并提出改进措施。     

新型重整催化剂的研究——Pt／L中沸石酸碱性的作用

Ｐｔ／ＫＬ、Ｐｔ／ＢａＫＬ及Ｐｔ／ＨＬ上的铂与沸石的酸碱位发生相互作用，导致催化剂上存在不同电子状态和粒度分布的铂位，从而产生有着完全不同催化作用、不同抗硫性能的两类催化剂，即以碱性沸石为载体的“单功能”催化剂和以酸性沸石为载体的“双功能”催化剂。在Ｐｔ／ＫＬ、Ｐｔ／ＢａＫＬ催化剂上，存在着对硫敏感的具有环化脱氢功能和对硫不敏感的仅具有脱氢功能的两类铂活性位。     

用迁移率和载流子浓度研究碲镉汞中的深能级

获得了一种研究碲镉汞深能级的方法。通过分析迁移率 载子浓度与温度的关系，可以得到关于深能级的重要依据。     

Implementation of secure digital communication by hyperchaoticsynchronisation

By active-passive-decomposition synchronisation, the application of the one-way coupled ring map lattice hyperchaotic system in secure digital speech communication is demonstrated. Synchronisation guarantees strong security and recovery without error     

NH_4Cl水溶液在成膜过程中的致孔作用

本文以ＮＨ４Ｃｌ饱和水溶液做添加剂，对ＰＶＤＦ／ＮＭＰ体系在成膜过程中的致孔作用做了研究。铸膜液中随ＮＨ４Ｃｌ水溶液加入量的改变，膜孔径也发生变化，并出现最大值。通过Ｘ－射线衍射扫描发现制膜液中存在无机盐时膜中无定形态结构增加，表明无机盐的加入有助于膜孔形成     

多晶 Na-β″-Al_2O_3的 Ag~+交换及性能研究

研究了多晶 Na-β″-Al_2O_3的 Ag 离子交换动力学,采用一维双面扩散模型处理,求得离子交换过程中 Na~+、Ag~+的互扩散系数.样品的形貌和结构采用 EPMA、SEM、XRD 等分析技术进行观察和分析.测试了 Na-β″-Al_2O_3和 Ag-β″-Al_2O_3及部分 Ag~+交换的 Na/Ag-β″-Al_2O_3样品的电导率,并进行了理论分析.     

在柔性变焦系统中的压力变焦镜

从理论上和实验上对水冷镜的镜面曲率半径随压力变化的规律作了研究。对压力变形后镜面相对于球面作了波像差分析，分析表明压力变焦镜用于中红外激光系统是合适的     

无明胶重铬酸盐全息记录软片的正性光抗蚀特性

对无明胶重铬酸盐全息记录软片（ＮＧＤ）的光正性抗蚀特性进行了分析研究，通过对溶解度的分析及红外光谱的测定，首次提出ＮＧＤ是一种新型的紫外正性光抗蚀材科，给出了实验及分析结果。